- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Quantity: | |
|---|---|
GD-17040A
GOLD
0.0017%~5% Automatic X-ray Fluorescence Sulfur in Oil Analyzer for Fuel Oil Analysis
Introduction：
1. The X-ray Fluorescence Sulfur in Oil Analyzer is specially designed to determine sulfur content in the petroleum products. Adopts energy-dispersive principle, and with electrical, mechanical and microprocessor integration design, so it is rapid and accurate.
2. The X-ray Fluorescence Sulfur in Oil Analyzer can meet the requirements of national standard of China GB/T 17040, SH/T0742 and GB/T11140 on repeatability and reproducibility, and it can also meet requirements of ASTM D4294.
3. The X-ray Fluorescence Sulfur in Oil Analyzer provides a measure to determine sulfur content during petroleum or petrochemical production process.
4.Few samples are used for testing.(3ml-5ml), the detection time is fast (1min ~ 5min), and the detection result is stable, accurate and reliable.
5. The detection lower limit of sulfur content can reach 0.0017%
6. The unit of measurement result can be selected, ppm or (m / m)%.
Product Parameters：
(1) Measuring range: 0.0017%~5%
(2) Repeatability (r): <0.4347 X0.6446
(3) Reproducibility (R): <1.9182 X0.6446
(4) Detection limit: 17 ppm
(5) Oil sample quantity: 3 ml-5ml.
(6) Measurement time: it can preset 30, 60, 90, 120, 150s, measurement repeat times:1, 2, 3, 5, 10(times).The default measurement time of this instrument is 3 minutes, and the fastest measurement time is 1 minute.
(7) Sample measurement: Automatic measurement of single sample, average value and standard deviation at the end of measurement.
(8) Calibration curve numbers: it can save 10 calibration curves.
(9)Working condition: Ambient temperature: (10~30)ºC; Relative humidity: ≤85% (30ºC)
(10) Dimension: 480mm×380mm×140mm
(11)Weight:13kg.(Net weight)
Configuration list：
No. | Name | Unit | Quantity | Remark |
1 | Main unit | Set | 1 | |
2 | Sample cell (Two parts) | Set | 200 | |
3 | Sample cell film (100 piece/box) | Box | 2 | |
4 | Leakage protection device (two parts) | Set | 1 | |
5 | Multifunctional pressure shaping device (two parts) | Set | 1 | |
6 | Printing paper (57 mm in width; Φ30mm) | Roll | 3 | |
7 | Calibration sample (4 ml/piece,11piece/ set) | Set | 2 | |
8 | Power supply wire | Piece | 1 | |
9 | 3 ml Pipette | Box | 2 | 100 piece/box |
Related products:
Parameter | GD-5453 | GD-4294 | GD-17040 |
| Picture |  |  |  |
Standards | ASTM D6667 - 2010, ASTM D7183,ASTM D5453 - 2016 | ASTM D4294-03 | GB/T 17040, GB/T11140, ASTM D4294 |
Test sample | Solid, Gas and Liquid 0.1~10000mg/L | 17 ppm to 5% | Petroleum oil with sulfur content of 7ppm to 5% |
Test method | Ultraviolet fluorescence method | fluorescence intensity ratio analysis methods | X-ray fluorescence (XRF)method |
Dimension | Host: 305(W)×460(D)×440(H)mm | 460*260*260mm | 468*368*136mm |
Working temperature | 5~40ºC | 5~40ºC | 5~40ºC |
Relative humidity | ≤85%(30ºC) | ≤85%(30ºC) | ≤85%(30ºC) |
Power suply | AC220V ±20V, 50Hz | AC220V ±20V, 50Hz | AC220V ±20V, 50Hz |
0.0017%~5% Automatic X-ray Fluorescence Sulfur in Oil Analyzer for Fuel Oil Analysis
Introduction：
1. The X-ray Fluorescence Sulfur in Oil Analyzer is specially designed to determine sulfur content in the petroleum products. Adopts energy-dispersive principle, and with electrical, mechanical and microprocessor integration design, so it is rapid and accurate.
2. The X-ray Fluorescence Sulfur in Oil Analyzer can meet the requirements of national standard of China GB/T 17040, SH/T0742 and GB/T11140 on repeatability and reproducibility, and it can also meet requirements of ASTM D4294.
3. The X-ray Fluorescence Sulfur in Oil Analyzer provides a measure to determine sulfur content during petroleum or petrochemical production process.
4.Few samples are used for testing.(3ml-5ml), the detection time is fast (1min ~ 5min), and the detection result is stable, accurate and reliable.
5. The detection lower limit of sulfur content can reach 0.0017%
6. The unit of measurement result can be selected, ppm or (m / m)%.
Product Parameters：
(1) Measuring range: 0.0017%~5%
(2) Repeatability (r): <0.4347 X0.6446
(3) Reproducibility (R): <1.9182 X0.6446
(4) Detection limit: 17 ppm
(5) Oil sample quantity: 3 ml-5ml.
(6) Measurement time: it can preset 30, 60, 90, 120, 150s, measurement repeat times:1, 2, 3, 5, 10(times).The default measurement time of this instrument is 3 minutes, and the fastest measurement time is 1 minute.
(7) Sample measurement: Automatic measurement of single sample, average value and standard deviation at the end of measurement.
(8) Calibration curve numbers: it can save 10 calibration curves.
(9)Working condition: Ambient temperature: (10~30)ºC; Relative humidity: ≤85% (30ºC)
(10) Dimension: 480mm×380mm×140mm
(11)Weight:13kg.(Net weight)
Configuration list：
No. | Name | Unit | Quantity | Remark |
1 | Main unit | Set | 1 | |
2 | Sample cell (Two parts) | Set | 200 | |
3 | Sample cell film (100 piece/box) | Box | 2 | |
4 | Leakage protection device (two parts) | Set | 1 | |
5 | Multifunctional pressure shaping device (two parts) | Set | 1 | |
6 | Printing paper (57 mm in width; Φ30mm) | Roll | 3 | |
7 | Calibration sample (4 ml/piece,11piece/ set) | Set | 2 | |
8 | Power supply wire | Piece | 1 | |
9 | 3 ml Pipette | Box | 2 | 100 piece/box |
Related products:
Parameter | GD-5453 | GD-4294 | GD-17040 |
| Picture | | | |
Standards | ASTM D6667 - 2010, ASTM D7183,ASTM D5453 - 2016 | ASTM D4294-03 | GB/T 17040, GB/T11140, ASTM D4294 |
Test sample | Solid, Gas and Liquid 0.1~10000mg/L | 17 ppm to 5% | Petroleum oil with sulfur content of 7ppm to 5% |
Test method | Ultraviolet fluorescence method | fluorescence intensity ratio analysis methods | X-ray fluorescence (XRF)method |
Dimension | Host: 305(W)×460(D)×440(H)mm | 460*260*260mm | 468*368*136mm |
Working temperature | 5~40ºC | 5~40ºC | 5~40ºC |
Relative humidity | ≤85%(30ºC) | ≤85%(30ºC) | ≤85%(30ºC) |
Power suply | AC220V ±20V, 50Hz | AC220V ±20V, 50Hz | AC220V ±20V, 50Hz |
