Availability: | |
---|---|
Quantity: | |
GD-H1702
GOLD
GD-H1702
ASTM D6138 Grease EMCOR Test Machine
EMCOR Method:
On a special table, a shaft table fitted with bearings coated with a sample of the grease to be tested is run three times in an 8-hour cycle under the specified conditions. At the end of the run, the outer raceway of the bearing in the table is inspected and the degree of corrosion is measured with a dial. The method covers the determination of corrosion-preventive properties of greases using grease-lubricated ball bearings under dynamic wet conditions.
Features:
1.The grease EMCOR test machine comes with Standard testing bearing, 30x70x19mm.
2.Reflector observation bearing without magnify function, easily operation
3.Big torque motor, driving without any obstruct
4.Digital display operation time and stop time
5.Automatic turn off the motor when testing complete
6.Suitable for both of the dynamic and static test
7.Widely applied by the lubricating grease manufacturer and related inspection department.
Applicable standards:
1.SH/T0700 Determination of rust-prevention characteristics of lubricating greases.
2.ISO 11007 Petroleum products and lubricants - Determination of rust-prevention characteristics of lubricating greases.
3.ASTM D6138 Standard test method for determination of corrosion-preventive properties of lubricating greases under dynamic wet conditions EMCOR test.
Parameters:
Model No. | GD-H1702 Grease EMCOR Test Machine |
Standard | ASTM D6138, SH/T0700, ISO 11007 |
Rotary Method | AC motor drive |
Rotary Speed | 80~85RPM |
Timer method | Digital timer |
On/Off Machine | Can Setup any time |
Power | 600W |
Input | AC220v/50Hz |
Instrument Dimension | 140*320*240mm |
Net Weight | 46KG |
Leading and Original Manufacturer of Lubricating Oil / Grease Testing Equipment in China, welcome to inquiry!
ASTM D6138 Grease EMCOR Test Machine
EMCOR Method:
On a special table, a shaft table fitted with bearings coated with a sample of the grease to be tested is run three times in an 8-hour cycle under the specified conditions. At the end of the run, the outer raceway of the bearing in the table is inspected and the degree of corrosion is measured with a dial. The method covers the determination of corrosion-preventive properties of greases using grease-lubricated ball bearings under dynamic wet conditions.
Features:
1.The grease EMCOR test machine comes with Standard testing bearing, 30x70x19mm.
2.Reflector observation bearing without magnify function, easily operation
3.Big torque motor, driving without any obstruct
4.Digital display operation time and stop time
5.Automatic turn off the motor when testing complete
6.Suitable for both of the dynamic and static test
7.Widely applied by the lubricating grease manufacturer and related inspection department.
Applicable standards:
1.SH/T0700 Determination of rust-prevention characteristics of lubricating greases.
2.ISO 11007 Petroleum products and lubricants - Determination of rust-prevention characteristics of lubricating greases.
3.ASTM D6138 Standard test method for determination of corrosion-preventive properties of lubricating greases under dynamic wet conditions EMCOR test.
Parameters:
Model No. | GD-H1702 Grease EMCOR Test Machine |
Standard | ASTM D6138, SH/T0700, ISO 11007 |
Rotary Method | AC motor drive |
Rotary Speed | 80~85RPM |
Timer method | Digital timer |
On/Off Machine | Can Setup any time |
Power | 600W |
Input | AC220v/50Hz |
Instrument Dimension | 140*320*240mm |
Net Weight | 46KG |
Leading and Original Manufacturer of Lubricating Oil / Grease Testing Equipment in China, welcome to inquiry!